News April 29, 2012 - Florida Comparison
Two sections of roughly 30 square feet were outlined with approximately 18 mils coating on the surface.
Here is how it all stacked up;
GEOBLASTER®:
Compressor - I/R - 220/260HP
Blast Hose - 100’ of 1-1/4ID + 50’ of 1”ID Whip
Nozzle - Kennemetal XL #8
Time to SP6 Finish = 5:11
The blast pattern the GEOBLASTER® created was much more consistent, and the smaller compressor consumed a great deal less fuel per hour.
Competitor:
Compressor - I/R - 365 H
Blast Hose - 100’ of 1-1/4ID + 50’ of 1”ID Whip
Nozzle - Kennemetal XL #8
Time to SP6 Finish = 6:57
(The workers on-site had been somewhat intimidated by the competitive machines complexity. It has the safety shutdown, and blast pressure regulators located on the same side of the panel as the incoming compressor hose, and outgoing blast hose connector, this can be considered a major safety hazard, and the pot pressure regulator is located on the inside of the control panel.)
After using the GEOBLASTER® for more than a week, the contractor estimates he is getting nearly double the daily production that our competitors equipment was giving him.
Once again, GEOBLASTER® PROVES to be the Contractor’s Machine!
PROVEN. PRODUCTIVE.
April 10, 2012 - Florida and Georgia Distribution
GEOBLASTER® Equipment is pleased to announce our latest distributors in Florida and Georgia. Surface Preparation Solutions will be carrying GEOBLASTER® in the Southeastern United States. We are very pleased to be working with Mike Sy and Randy LaTour.
Please contact us to schedule a demonstration, and to answer any questions.
January 19, 2012 - Houston, TX
GEOBLASTER® Equipment will be in the Houston Texas area demonstrating our equipment. With the most productive, proven and reliable wet-abrasive system on the market, we provide our customers with the best equipment, service and support in the industry.
Please contact us to schedule a demonstration, and to answer any questions.
December 2, 2011 - SSPC 2012 - Tampa, FL - January 30-February 2, 2012 - Booth #337
Tampa Convention Center
GEOBLASTER® Equipment was designed and built with the background of over 50 years of combined blasting and coatings experience. We are committed to providing the best in customer service and support. We build the most producctive, proven and reliable wet-abrasive blasting equipment.
Please visit us at SSPC 2012 in booth #337, our experts will be on hand to answer any questions, and book demonstrations.
March 1, 2011 - GeoBlast News
GEOBLASTER® covers over 8000 miles, in 9 weeks to establish roots in the South Eastern USA. The mission's focus was to demonstrate the GEOBLASTER® equipment and our Wet Abrasive expertise to potential customers.
Mobile demo-teams had appointments in Texas, Louisiana, Mississippi, and Florida. The overwhelming consensus among spectators was the near absence of dust, production times rivalling sandblasting, and the design simplicity of the machine.
The "rental ready-ness" of the equipment was a major factor for garnering fleet rental interest. Some of the design benefits noticed were the fully-adjustable and well-labelled controls; coupled with the straight-forwardness of the build and easily replaced parts & components; making the equipment serviceable and profitable.
NEW DISTRIBUTOR
We welcome our newest Distributor, Alliance Parts & Equipment in Houma, Louisiana.
Sales, Service & Rentals 1-985-851-6200
TRADE SHOWS
**** DECEMBER 1-3
Exhibitors at International 2010 Work Boat Show in New Orleans, Louisiana.
**** JANUARY 31-FEBRUARY 3
Exhibitors at 2011 SSPC (Protective Coatings Show) in Las Vegas, Nevada
1/12/10 - 3/12/10
Team GEOBLASTER® will be in New Orleans December 1 - December 3, 2010 for the annual International Workboat Show.
We'll be located in Booth 3506 we'll be showcasing our unparalleled surface and coating removal technology. Come down to the Morial Convention Center in New Orleans and learn about the latest and greatest technology in the industry. Talk with GEOBLASTER® professionals and request a demo. Find out how it can help you conduct business more efficiently with minimal-to-no environmental impact.
31/08/10
GEOBLASTER is pleased to announce our newest distributor of the GEOBLASTER® to the family, Gulf Coast GeoBlast LLC., based out of Houston, Texas.
Gulf Coast GeoBlast is now booking demonstrations beginning September 27, 2010, and will be servicing customers throughout Texas.
To book your demonstrations, or for any questions you may have, contact Gulf Coast GeoBlast at 281-638-7901.
